+65 6482 5183

Dormer DS2

AUTO GATE SYSTEM AHEAD OF THE REST.

dormer-ds2-motorBacked by 15 years or solid marketing experience to meet today's demanding needs. Dormer Automatic Gate Systems set new standards in quality and reliability. Blending quality materials with modern technology, Dormer Automatic Gates Systems incorporate international standards to meet the harsh weather conditions they are exposed to so that they can be relied upon for their efficiency and superior durability. From the actuators which are engineered to provide many years of smooth operation to the high speed adjustable motor, or the ultra sensitive transmitter through to the receiver, Dormer Automatic Gate Systems are made from the best materials to protect your investments.

ACTUATOR

TYPE: A torque limiting drive unit with D.C. motor, speed reducer and Nylon Bush, which grips between an output shaft and arm connected to a gate. The pressure exerted by the bush and shaft is adjustable by radically tightening the bush with screw systems.
Motor Voltage Rating: 12-24V Direct Current, (D.C)
Power Consumption: 25 watt per Actuator
Motor Rated Load Speed: 4600 rpm
Insulation Resistance: 1.5 mega ohm
Closing Speed (from 90 angle): 6-8 sec
Max. Leaf Opening Angle: 180
Max Leaf Weight Allowable: 200kg
Driving Shaft: Nickel chrome plated solid steel shaft
Casing: Waterproof and rust resistance cast alloy
Trust Force: =50kg
External Dimension: 255mm (L) x 240 mm (W) x 125mm (H)

CONTROL PANEL (5 AMP fuse)

Type: Using State-of-the-art Microprocessor for reliable control and encased in weather resistant casing. Power supply is step down to 24V direct current to operate control panel, receiver, motors and electronic lock.
Power Supply: 230VAC, 5Amps, 50Hz
Motor Outut: Two speed gate control 24V D.C for fast speed and 12 V D.C for slow speed control by timer
Normal Operation: One or two gate leaf control by indoor push button or remote control
Battery backup with charges (optional)
Automatic lighting control available
External Dimension: 310mm (L) x 250mm (W) x Depth-60
Weight: 5kg

ACTUATOR ARM & BRACKET

Type: Nickel- chrome plated mild steel
Bearing Serial: Fuji- 10-30A
Arm Dimension: 485mm (L) x 25mm (W) x 5mm (H)

TRANSMITTER AND RECEIVER

Type: Battery-operated, crystal controlled frequency. Modulated radiowave.

2 Chanel/ Remote Control
Range: Effective 40m, Maximum 60m
Passcode: Set by 8X3 ways switches easily accessible and change by owner
Battery: Uder normal usage, a 12V. battery should last 6 months
Case Size: 50mm (L) x 35mm (W) x 12mm (H)
Weight: 0.3kg

SOLENOID LOCK WITH LOCK KEEPER

Type: This lock is applicable for both outward and inward swing gates
Rated Voltage: 24V direct current (D.C)
Lock Keeper: Solid mild steel with PVC protective coating
Spring: Stainless steel
Manual Override: Key operated cam-lock to enable manual operation in the event of power failure
Dimension: 115mm (L) x 70mm (W) x 55mm (H)